25G SFP28 LWDM Optical Transceiver

25G SFP28 CWDM optical transceiver module, support 25Gb/s and up to 10 km transmission, it works in high-speed IDC connection solutions, 5G network front-haul solution, and so on.

25G SFP28 MWDM optical transceiver module, support 25Gb/s and up to 10 km transmission, it works in high-speed IDC connection solutions, 5G network front-haul solution, and so on.

25G SFP28 DWDM optical transceiver module, support 25Gb/s and up to 10 km transmission, it works in high-speed IDC connection solutions, 5G network front-haul solution, and so on.

25G SFP28 Bi-direcation optical transceiver module, support 25Gb/s and up to 10 km transmission, it works in high-speed IDC connection solutions, 5G network front-haul solution, and so on.

25G SFP28 optical transceiver module, support 25Gb/s and SR up to 100 m transmission, LR 25G SFP28 up to 10 km transmission, and ER 25G SFP28 up to 40 km transmission, it works in high-speed IDC connection solutions, and so on.

40G QSFP+ SR4 100m 850nm MPO Optical Transceiver，support 40Gb/s and up to 100m transmission on MM fiber, it works in high-speed IDC connection solutions and so on. Features 4 independent full-duplex channels Up to 10.5Gbps data rate per channel MTP/MPO optical connector QSFP MSA (SFF-8436) compliant Digital diagnostic capabilities Capable of over 100m transmission on OM3 multi-mode fiber CML compatible electrical I/O Single +3.3V power supply Operating case temperature: 0~70C XLPPI electric interface (with 1.5W Max power) RoHS-6 compliant

Features CAUI -10 Electrical Interface:10 Lanes @10Gbit/s for CFP port CAUI -4 Electrical Interface:4 Lanes @25.78Gbit/s for QSFP28 port Hot Pluggable Low latency FEC MDIO, I2C Support Compliant to CFP MSA Case operating temperature: 0 to 70 °C The RQ-CFP-QSFP28-F Adaptor Module converts a 100 Gigabit CFP port into a 100 Gigabit QSFP28 port. With the Adaptor Module, customers have the flexibility to use the 100 Gigabit CFP interface port of a switch with CFP modules or QSFP28 modules. For 100G Ethernet, reference clock can switch 161.133mhz or 644.531mhz; For OUT 4, reference clock can switch 174.703mhz or 698.812mhz; Users can control whether FEC function is enabled or not through register configuration.

功能特性 1个10/100/1000 Mbps 自适应RJ45端口 1个上联口为1000Mbps SFP接口 支持端口自动翻转（Auto MDI/MDIX） 流控方式：全双工采用IEEE 802.3x标准，半双工采用Back pressure标准 符合IEEE 802.3 10Base-T和IEEE 802.3u 100/1000Base-TX标准 采用存储转发的交换机制 64～9000帧长范围内均可达到线速